Product ID:FM GREASE, 1355
MSDS Date:06/26/1985
FSC:9150
NIIN:00N045306
MSDS Number: BTXCP

Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)

Info Phone: 312-856-3907

Cage: 15958

Telephone: 800 447-8735

Cage: 15958

MINERAL OIL, SLAB OIL; (SEVERELY HYDROPROCESSED, SOLVENT

CAS: 8042-47-5

RTECS: PY8047000

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: NO SIGNIFICANT IRRITATION
EXPECTED. INHAL: NOT APPLICABLE. INGEST: EXPECTED TO BE RELATIVELY
NON- TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN:
FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . INHAL: REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP). INGEST: IF A LA
RGE AMOUNT IS SWALLOWED, INDUCE VOMITING. GET MEDICAL ATTENTION.

Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:CONTAIN AND REMOVE BY MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPVD SAFETY GLASSES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE, OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION OR PERMITTED LANDFILL UNLESS DIRECTED OTHERWISE BY
APPLICABLE ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.